Stiebel Eltron tankless water heaters in Houston

Electric hot water.
Since 1924.

Stiebel Eltron’s Tempra Plus serves the whole house with no gas line or vent, and its patented Advanced Flow Control trims flow to hold your set temperature. We’ll size one to your home and panel.

Plan my Stiebel installation
Stiebel Eltron Tempra Plus electric tankless water heater
Tempra Plus family image
Manufacturer product photography

Two for the house.
Two for the point of use.

Tempra heaters serve the whole house; DHC heaters serve a sink or a bathroom. In both ranges, Plus in the name means Advanced Flow Control.

WHOLE-HOUSE + FLOW CONTROL

Tempra Plus

The Tempra with flow control.

Six sizes, from Tempra 12 Plus to Tempra 36 Plus. Patented Advanced Flow Control slightly reduces flow when demand outruns the heater, so your set temperature holds. Two memory presets and a 109°F limit option.

WHOLE-HOUSE ELECTRIC

Tempra Trend

Same sizes, simpler controls.

The same six sizes, without Advanced Flow Control. Sensors still track incoming temperature, flow and output, and the elements switch on in stages to match. One memory preset and the same 109°F limit.

POINT-OF-USE + FLOW CONTROL

DHC-E Plus

One heater, several sinks.

DHC-E 8/10-2 Plus and DHC-E 12/15-2 Plus, up to 14.4 kW, for bathrooms, break rooms and utility sinks. Direct Coil heating resists limescale; never connect it to a salt-regenerated softener.

SINGLE-SINK POINT-OF-USE

DHC Trend

Temperature set at install.

No screen and no external temperature adjustment, to limit tampering. The installer picks one of four output temperatures with an internal jumper. Up to 14.4 kW on the DHC 12/15-2 Trend.

Power draw, flow and warranty terms vary by model. Your electrical service and the exact heater in your quote decide which numbers apply.

Who makes Stiebel Eltron

Dr. Theodor Stiebel founded Stiebel Eltron in Berlin in 1924, and the company began by making electric water heaters for the German market. The Stiebel Eltron Group is still family owned, with its head office in Holzminden, Germany. Its US division, Stiebel Eltron, Inc., was established in 1990 and is based in West Hatfield, Massachusetts. Stiebel says it developed tankless electric water heating more than 90 years ago and has manufactured more than 20 million tankless units.

What sets Stiebel Eltron apart

Electric, with nothing to vent

Every Stiebel Eltron tankless water heater runs on electricity and must be hard-wired. With no burner, there is no gas line to size, no vent pipe to route and no condensate to drain. Stiebel says the Tempra 20 Plus can go anywhere in the home, and the Tempra manual asks for it as close as possible to the main hot water fixtures.

Advanced Flow Control

Stiebel invented Advanced Flow Control and was awarded German patent DE 3805441 C2 for it. When you ask for more hot water than the heater can bring to your set temperature, it reduces the flow slightly so the temperature holds. It is standard on Tempra Plus, DHC-E Plus and DHX Plus models. Tempra Trend does without it.

Heating that adjusts itself

Every Tempra continually monitors the incoming water temperature, the flow through the heater and the temperature it produces, then brings its heating elements on in stages to match. Stiebel calls this Self-Modulation Energy Technology. Subject to flow rate, a Tempra can deliver water up to 140°F.

Which Stiebel Eltron fits a Houston home

Start with your electrical service, which rules sizes in or out. Stiebel’s minimum main service figures include 100 amps for a Tempra 12 or 15, 125 amps for a Tempra 20 and 200 amps for a Tempra 29. The Tempra 20 Plus is rated at 19.2 kW and draws 80 amps at 240 volts, split across two 40-amp circuits. We check your panel before we quote.

Flow comes next. Stiebel sizes by groundwater temperature and the number of fixtures running at once, and its sizing guide puts Southern US groundwater at about 60 to 70°F. Houston’s incoming water averages about 67°F, and the seasons move it. Stiebel engineered the Tempra 20 Plus for whole-house use where incoming water is above 60°F and rates it for up to 3.75 GPM, a figure that matches a 35°F temperature rise. Cooler water needs more rise, so we size for winter water and for the fixtures your household runs together.

No Tempra or DHC model has a recirculation pump built in. Stiebel publishes three Tempra recirculation layouts instead, including one for homes with no return line, and says a Tempra looped with an SHC Mini-Tank minimizes the wait for hot water and reduces water use.

Strengths and trade-offs

Where Stiebel Eltron stands out

  • Stiebel describes the Tempra as about the size of a briefcase and silent, with no mechanical switches. A Tempra 20 Plus weighs 16.1 pounds.
  • Stiebel says a Tempra saves 15 to 20% compared with an electric tank water heater.
  • Tempra heats water in solid copper heating chambers, and DHC-E Plus uses Direct Coil heating, which Stiebel says self-cleans for increased limescale resistance.

What to weigh

  • Electrical capacity sets the limits: larger Tempra sizes need larger service, and the job can include a panel or service upgrade.
  • Stiebel’s 99% efficiency claim for the Tempra 20 Plus is its own measure; the federal UEF rating for the same heater is 0.97.
  • DHC-E Plus models must not be connected to a salt-regenerated water softener.
  • If remote control matters to you, note that Stiebel lists no Wi-Fi or app feature for Tempra.
  • On energy savings alone, payback typically takes 12 to 20+ years. Our tank vs tankless comparison covers the other factors.

Stiebel Eltron’s warranty, in plain English

Stiebel’s warranty runs on two clocks. The longer one is for leaks caused by a manufacturing defect; the shorter one is for defects in workmanship and materials. For Tempra Plus and Tempra Trend the terms are 7 years and 3 years; for DHC-E Plus and DHC Trend, 10 years and 3 years. Stiebel’s product pages list no labor coverage and no extended term for registering.

Three habits protect it. Keep your receipt: if you cannot show when you bought the heater, Stiebel counts the warranty from the manufacture date stamped on it. Register the heater online; Stiebel says registering creates a record that can be used if you have an issue. And take Houston’s hard water seriously: an earlier Tempra manual, still posted by Stiebel, says damage caused by scale or a high mineral count is not covered. The full terms are in Stiebel’s Tempra warranty document, a PDF.

Installing a Stiebel Eltron in Houston

A Stiebel installation needs two trades: Stiebel’s Tempra manual says the unit must be installed by a licensed electrician and plumber. Each circuit gets its own double-pole breaker and supply cable, and Stiebel specifies copper conductors sized to keep voltage drop below 3% under load. On the plumbing side, Tempra models connect with 3/4-inch NPT braided steel or flex connectors and must be mounted vertically with the water fittings facing down.

Plan for an indoor wall. Stiebel allows an outdoor installation only when the heater is protected from the elements. There is no built-in freeze protection, and Stiebel’s winterizing advice is to take the unit off the wall and tilt it to drain, or to circulate non-toxic antifreeze.

Texas rules put the plumbing permit in the hands of a licensed master plumber, the Responsible Master Plumber, and Houston also requires that plumber to be registered with the City; our Houston permit guide walks through it. We publish a single price range for tankless equipment and installation, $4,200 to $8,000. What pushes a job toward either end is set out on our tankless installation page; with a Stiebel, that includes the circuits and your electrical service. Replacing one tankless with another usually takes 4 to 6 hours. Replacing a tank instead? Our tank-to-tankless planning guide covers the switch.

Repairs and maintenance

Stiebel’s FAQ says that, depending on water hardness, scale may need to be flushed from the unit every six months to a year, and it recommends its Flow-aide Descaling Kit, part 540000. That matters here. The USGS classes Houston’s water as hard, and at about 8 grains per gallon it is past the 7 grains per gallon where Stiebel says hard water treatment should be considered. For a Tempra, it says a non-salt-based softener or an inline filter may prolong the unit’s life; our whole-house water filtration page covers treatment options.

For a flat $195 a year, our tankless maintenance visit flushes and professionally descales the heater, works through a 12-point check and ends with a written report. If a Tempra stops heating, leave the cover on: its thermal cut-outs sit underneath, and Stiebel says to disconnect power before opening the case. Our tankless repair team diagnoses the fault before replacing any part, and most tankless repairs cost $150 to $600.

Plan the power first, then the plumbing.

Hot Water Guys installs, repairs and maintains Stiebel Eltron tankless water heaters across Greater Houston. With an electric heater, planning starts at your panel, then moves to the fixtures you run at once and the wall it will hang on.

Check your service size

Your main breaker sets the ceiling. Stiebel asks for at least 125-amp service for a Tempra 20 and 200 amps for a Tempra 29.

Plan circuits & breakers

A Tempra 20 Plus needs two 40-amp circuits, each with its own double-pole breaker and copper cable, installed by a licensed electrician.

Size for temperature rise

Southern US groundwater runs about 60 to 70°F, Stiebel says. We size from the rise to your set temperature and the fixtures you run at once.

Pick an indoor wall

No gas line or vent is needed. The heater mounts vertically, fittings down, as close as possible to the main hot water fixtures.

Thinking outdoors?

Stiebel lists no outdoor Tempra model and no outdoor kit. It allows an outdoor install only where the heater is protected from rain, freezing temperatures and critters. The units do not self-drain, so a freeze risk means draining the heater.

GENERAL TANKLESS PLANNING RANGE
$4,200 – $8,000

This is our general planning range for tankless equipment and installation, not a quote for a Tempra 20 Plus. The size, your electrical service, the circuits it needs and any code work set your price.

See installation scope & cost details

Look after the
long run.

Stiebel says a tankless unit will last at least 20 years, and that water quality and use directly affect how long.

ONGOING CARE

Hard water builds scale. Flush it out on schedule.

Stiebel ties flushing to hardness: every six months to a year. Houston’s water, at about 8 grains per gallon, is past the 7 grains where it says treatment should be considered.

Between flushes, clear scale and dirt from faucet aerators, showerheads and the heater’s filter screen. Stiebel notes that isolating valves make the inlet screen easy to clean.

Arrange tankless maintenance
WARRANTY & REGISTRATION

Keep your receipt
and register online.

Tempra Plus and Tempra Trend: 7 years against leakage and 3 years against defects in workmanship and materials. DHC-E Plus and DHC Trend: 10 years and 3 years.

Without proof of the purchase date, coverage runs from the manufacture date stamped on the heater. Registering creates a record you can use if a problem comes up.

Review Stiebel’s Tempra warranty terms (PDF)

Before you
go electric.

Answers on Plus versus Trend, sizing, amps, controls, scale, cost and coverage.

What does Tempra Plus add over Tempra Trend?

Both come in the same six sizes, from Tempra 12 to Tempra 36, and both read incoming temperature and flow to stage their heating. Tempra Plus adds a second memory preset and patented Advanced Flow Control, which earns its keep when your household calls for more hot water than the heater can make. Their warranty terms are the same.

How big a Tempra does my house need?

It comes down to three things: your incoming water temperature, the fixtures you run at once and your electrical service. Houston’s incoming water averages about 67°F, inside the 60 to 70°F band Stiebel gives for Southern US groundwater. Each step up in Tempra size draws more current, so we size from your household’s peak use and your panel, then name the exact model.

Does a Stiebel need gas, a vent or a bigger panel?

No gas line and no vent: every Stiebel tankless is electric and hard-wired. Electrical capacity is the real question, since even a Tempra 12 or 15 calls for at least 100-amp main service and larger sizes need more. Plan on an indoor wall; Stiebel lists no outdoor model, and an outside install must be protected from the elements.

What can I adjust on a Tempra?

Tempra Plus has two temperature memory presets and calculates the energy it saves; Tempra Trend has one preset, recalled at the push of a button. Both can be set to cap hot water at 109°F to help prevent scalding. Stiebel’s Tempra pages list no Wi-Fi or app control.

Does Houston’s hard water change the descaling schedule?

It can. Stiebel says scale may need flushing every six months to a year, depending on hardness, and Houston’s water rates as hard on the USGS scale. Plan on at least one flush a year, and if your heater scales up quickly, we may suggest the shorter interval. Our $195 yearly service flushes and descales the heater and includes a 12-point check.

What goes into the price of a Stiebel install?

Our tankless range, equipment and installation included, is $4,200 to $8,000, and it is general guidance rather than a price for any one model. With a Stiebel, the size you choose, the circuits it needs and any electrical service upgrade move the number, so call 832-673-0909 for a free quote.

Which Stiebel models get the longer warranty?

Of the four families here, the point-of-use DHC-E Plus and DHC Trend: Stiebel covers them for 10 years against leakage, compared with 7 years for Tempra Plus and Tempra Trend. All four carry 3 years against defects in workmanship and materials. Labor is not listed in those terms, so ask how it is handled when you compare quotes, and keep your receipt.

Still exploring?

Weighing gas as well as electric? Rinnai, Navien, Rheem and Noritz each have tankless families worth a look for your home.

Browse all nine brand guides

Let’s pick
your Stiebel.

Send us your main breaker’s amp rating and what heats your water now. We’ll match a Tempra or DHC model to your panel and your hot water use.

Call the guysGet a free quote